Miele CVA 6805 Product Manual - Page 32

Setting the serving size 32, coffee beverage, Cappuccino, Latte macchiato, Caffè latte

Page 32 highlights

Setting the serving size The flavor of a coffee beverage depends not only on the type of coffee, but also on the quantity of water used. You can adjust the amount of water used for each portion of espresso, coffee or hot water to suit your cup size and the type of coffee used. For beverages prepared with milk, you can also adjust the milk and milk froth ratio in addition to the espresso or coffee size. You can also program the portion sizes of hot milk and froth. There is a maximum amount which can be programmed for each type of drink. Preparation stops when this is reached. The maximum portion size possible for that type of beverage will then be saved. The changed beverage size is always stored in the current profile. The name of the current profile is shown at the top left of the display. If there is insufficient water in the water tank during preparation, the coffee system will stop the portion programming. The portion will not be saved. From the "Drinks" menu: ^ Place the desired cup under the main dispenser. ^ Touch "Edit". ^ Touch "Change drink". ^ Swipe the display until the beverage you want appears and then touch it. ^ Touch ""Change the portion size". The desired beverage is prepared and the display shows "Save". ^ Touch "Save" when the cup has been filled to the desired amount. If you want to change the portion size for Cappuccino, Latte macchiato or Caffè latte the ingredients which make up the drink will appear in the display. Cappuccino: milk froth, espresso Latte macchiato: hot milk, milk froth, espresso Caffè latte: hot milk, coffee ^ Touch the ingredients for which you want to program the portion size. The selected ingredients have a check mark 9 beside them. ^ Touch "OK". 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

The flavor of a
coffee beverage
depends not only on the type of coffee,
but also on the quantity of water used.
You can adjust the amount of water
used for each portion of espresso,
coffee or hot water to suit your cup size
and the type of coffee used.
For beverages prepared with milk, you
can also adjust the milk and milk froth
ratio in addition to the espresso or
coffee size. You can also program the
portion sizes of hot milk and froth.
There is a maximum amount which can
be programmed for each type of drink.
Preparation stops when this is reached.
The maximum portion size possible for
that type of beverage will then be
saved.
The changed beverage size is
always stored in the current profile.
The name of the current profile is
shown at the top left of the display.
If there is insufficient water in the
water tank during preparation, the
coffee system will stop the portion
programming. The portion will
not
be
saved.
From the "Drinks" menu:
^
Place the desired cup under the main
dispenser.
^
Touch "Edit".
^
Touch "Change drink".
^
Swipe the display until the beverage
you want appears and then touch it.
^
Touch ""Change the portion size".
The desired beverage is prepared and
the display shows "Save".
^
Touch "Save" when the cup has been
filled to the desired amount.
If you want to change the portion size
for
Cappuccino
,
Latte macchiato
or
Caffè latte
the ingredients which make
up the drink will appear in the display.
Cappuccino:
milk froth, espresso
Latte macchiato:
hot milk, milk froth,
espresso
Caffè latte:
hot milk, coffee
^
Touch the ingredients for which you
want to program the portion size.
The selected ingredients have a check
mark
9
beside them.
^
Touch "OK".
Setting the serving size
32