Miele CVA 6805 Product Manual - Page 76

Step 2: Cleaning the air intake, hose and angled in the, front door, First - replacement parts

Get Miele CVA 6805 PDF manuals and user guides View all Miele CVA 6805 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

Cleaning clogged milk pipework To reassemble the lid: ^ First put the seal in the lid. Then insert the milk intake pipe into the seal. Make sure not to slide the beveled end of the milk intake hose into the seal. Step 2: Cleaning the air intake hose and angled section in the front door Do not use a needle or similar sharp item. They can damage the parts. ^ Open the service cover on the back of the front door. ^ First detach the air intake hose a from the opening c. Then pull off the angled section b. ^ Pull both hoses out of the angled section. ^ Clean the air intake hose a using the supplied cleaning brush. "Blowing through" can also dislodge any blockages. ^ Clean the opening for the air intake hose c in the front door. ^ Clean the angled section b under running water. If necessary, replace it with the supplied spare part. ^ Insert the brush into the milk hose d. Move the brush back and forth until all milk residue has been removed. 76

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
To reassemble the lid:
^
First
put the seal in the lid. Then
insert the milk intake pipe into the
seal.
Make sure not to slide the beveled
end of the milk intake hose into the
seal.
Step 2: Cleaning the air intake
hose and angled section in the
front door
Do not use a needle or similar sharp
item. They can damage the parts.
^
Open the service cover on the back
of the front door.
^
First detach the air intake hose
a
from the opening
c
. Then pull off the
angled section
b
.
^
Pull both hoses out of the angled
section.
^
Clean the air intake hose
a
using the
supplied cleaning brush. "Blowing
through" can also dislodge any
blockages.
^
Clean the opening for the air intake
hose
c
in the front door.
^
Clean the angled section
b
under
running water. If necessary, replace it
with the supplied spare part.
^
Insert the brush into the milk hose
d
.
Move the brush back and forth until
all milk residue has been removed.
76
Cleaning clogged milk pipework