Miele CVA 6805 Product Manual - Page 82
Installing the stainless steel, tubing in the unit, Connection to the water, supply, Do not, angled
View all Miele CVA 6805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Plumbing Installing the stainless steel tubing in the unit Connection to the water supply Make sure the stainless steel tube is not kinked or damaged. Do not trim stainless steel tube. Disconnect the machine from the electrical supply before connecting it to the water supply. ^ Remove the water connection cover at the lower rear side of the coffee machine. ^ Take the angled side of the stainless steel tube and check whether the sealing ring is in place. If necessary, insert it. ^ Place the union nut of the stainless steel tube onto the screw thread. ^ Make sure the fittings are tight. A faucet with a 3/4" connection thread is required for the connection. ^ Check whether the sealing ring is in place. If necessary, insert it. ^ Connect the stainless steel tube to the shut-off valve. You must only use the stainless steel tube supplied. Old or used tubes must never be connected to the coffee machine. ^ Make sure the fittings are tight. ^ Slowly open the shut-off valve to the water supply and check for leaks. If necessary, check whether the sealing ring and fittings are tight. You can now continue with the installation of the unit (see "Installation"). 82