Miele CVA 6805 Product Manual - Page 64
Descaling before being, prompted, Touch Descale unit.
View all Miele CVA 6805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Descaling The descaling program is now complete and drinks can be prepared again. When descaling the system, be sure to wipe off any splatters of descaling agent immediately! These could damage the surfaces. ^ Fill the water tank to the F mark with lukewarm water. ^ Add two descaling tablets to the water. Please observe the mixing ratio for the descaling tablets. It is important that you fill the water tank to the mark. Too little water can cause the descaling program to stop prematurely. ^ Reinsert the water tank and close the door. ^ Follow the instructions in the display. When the display shows, "Fill the water container with fresh tap water up to the descaling mark": ^ Rinse the water tank carefully with clean water. Make sure that no descaling agent is left in the water tank. Fill clean tap water up to the k mark. Also empty the waste container. The descaling process is complete when "Program finished" is displayed. ^ Touch "OK". After descaling the system, carefully clean the water tank and the drip tray to remove all traces of descaling agent. Descaling before being prompted The descaling program cannot be canceled once it has started. The program has to be carried through to the end. ^ Touch "Main menu" or the "Back" sensor. ^ Touch "Maintenance" y. ^ Touch "Descale unit". The descaling process will start. 64