Motorola DS6707-DP20411ZZR Reference Guide - Page 100

6 - 8 Symbol DS6707 Digital Imager Scanner Product Reference Guide Host RTS Line State Parameter # 9Ah This parameter sets the expected idle state of the Serial Host RTS line. The SSI Interface is used with host applications which also implement the SSI protocol. However, you can also use the digital imager scanner in a "scan-and-transmit" mode to communicate with any standard serial communication software on a host PC (see Decode Data Packet Format on page 6-8). If transmission errors occur in this mode, the host PC may be asserting hardware handshaking lines which interfere with the SSI protocol. Scan the Host: RTS High bar code to address this problem. *Host: RTS Low (00h) Host: RTS High (01h) Decode Data Packet Format Parameter # EEh This parameter selects whether to transmit decoded data in raw format (unpacketed), or with the packet format defined by the serial protocol. Selecting the raw format disables ACK/NAK handshaking for decode data. *Send Raw Decode Data (00h) Send Packeted Decode Data (01h)