Motorola DS6707-DP20411ZZR Reference Guide - Page 134

8 - 4 Symbol DS6707 Digital Imager Scanner Product Reference Guide RS-232 Host Parameters Various RS-232 hosts use their own parameter default settings. Selecting standard, ICL, Fujitsu, Wincor-Nixdorf Mode A, Wincor-Nixdorf Mode B, OPOS/JPOS, Olivetti, or Omron sets the defaults listed in Table 8-2. Table 8-2 Terminal Specific RS-232 Parameter ICL Fujitsu Wincor-Nixdorf Mode A Wincor-Nixdorf Mode B/ OPOS/JPOS Olivetti Omron Transmit Code ID Yes Yes Yes Yes Yes Yes Data Transmission Data/Suffix Data/Suffix Data/Suffix Format Data/Suffix Prefix/Data/ Data/Suffix Suffix Suffix CR (1013) CR (1013) CR (1013) CR (1013) ETX (1002) CR (1013) Baud Rate 9600 9600 9600 9600 9600 9600 Parity Even None Odd Odd Even None Hardware Handshaking RTS/CTS Option 3 None RTS/CTS Option 3 RTS/CTS Option 3 None None Software Handshaking None None None None Ack/Nak None Serial Response Time-out 9.9 Sec. 2 Sec. 9.9 Sec. 9.9 Sec. 9.9 Sec. 9.9 Sec. Stop Bit Select One One One One One One ASCII Format 8-Bit 8-Bit 8-Bit 8-Bit 7-Bit 8-Bit Beep On Disable Disable Disable Disable Disable Disable RTS Line State High Low Low Low = No data to Low send High Prefix None None None None STX (1003) None *In the Nixdorf Mode B, if CTS is low, scanning is disabled. When CTS is high, scanning is enabled. **If you select Nixdorf Mode B without connecting the digital imager scanner to the proper host, it may appear unable to scan. If this happens, scan a different RS-232 host type within 5 seconds of cycling power to the digital imager scanner.