Motorola H201 User Guide - Page 22

Poor audio quality

Page 22 highlights

3.21.11 Using the answering machine through the handset back keys You can also operate your answering machine through the 5 handset back keys. 3.21.11.1 Turning on or off the answer machine Press ANS ON/OFF to turn the answering system on or off. 3.21.11.2 Playing messages 1. Press from idle mode. New messages will be played in the sequence they are recorded following by any older messages. 2. During message playback, press the keys below to perform the following functions: Stop playing messages. Skip to play the next message. Press once to replay current message from the beginning. Press twice to playback the previous message. X Delete the current message. 4. Help The icon is not scrolling when the handset is placed on the base • Incomplete battery contact - adjust the handset on the base unit. • Dirty contact - clean the battery contact by wiping with an alcohol moistened cloth. • Battery is full - charging is not necessary at this time. No dial tone • If there is no base power, check the connections. Reset the phone by unplugging then plugging it back into an electrical outlet. • If the handset batteries are empty, recharge the battery pack for at least 24 hours. • Move the handset closer to the base if it is too far away. • Be sure to use the provided telephone cords. Poor audio quality • If the base is too close to electrical appliances, reinforced concrete walls, or metal door frames, move the base from these areas. No ring tone • The ring tone may be deactivated. • The volume may need to be increased. Caller ID does not work • Check your subscription with your network operator. • If you subscribe to high-speed internet service (Digital Subscriber Line - DSL) through your telephone lines, you must install a DSL filter between the telephone base and the telephone wall jack. The filter will prevent noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters. 22 Help

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

22
Help
3.21.11
Using the answering machine through the handset back
keys
You can also operate your answering machine through the 5 handset back
keys.
3.21.11.1 Turning on or off the answer machine
Press
ANS ON/OFF
to turn the answering system on or off.
3.21.11.2 Playing messages
1.
Press
from idle mode. New messages will be played in the
sequence they are recorded following by any older messages.
2.
During message playback, press the keys below to perform the
following functions:
4. Help
The
icon is not scrolling when the handset is placed on the
base
°
Incomplete battery contact - adjust the handset on the base unit.
°
Dirty contact - clean the battery contact by wiping with an alcohol
moistened cloth.
°
Battery is full - charging is not necessary at this time.
No dial tone
°
If there is no base power, check the connections. Reset the phone by
unplugging then plugging it back into an electrical outlet.
°
If the handset batteries are empty, recharge the battery pack for at
least 24 hours.
°
Move the handset closer to the base if it is too far away.
°
Be sure to use the provided telephone cords.
Poor audio quality
°
If the base is too close to electrical appliances, reinforced concrete
walls, or metal door frames, move the base from these areas.
No ring tone
°
The ring tone may be deactivated.
°
The volume may need to be increased.
Caller ID does not work
°
Check your subscription with your network operator.
°
If you subscribe to high-speed internet service (Digital Subscriber
Line - DSL) through your telephone lines, you must install a DSL filter
between the telephone base and the telephone wall jack. The filter
will prevent noise and caller ID problems caused by DSL
interference. Please contact your DSL service provider for more
information about DSL filters.
Stop playing messages.
Skip to play the next message.
Press once to replay current message from the
beginning. Press twice to playback the previous
message.
X
Delete the current message.