Motorola HT750 Service Manual - Page 21
Maintenance - repair
View all Motorola HT750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
3-1 Chapter 3 Maintenance 3.1 Introduction This chapter provides details about the following: l Preventive maintenance (inspection and cleaning) l Safe handling of CMOS and LDMOS devices l Disassembly and reassembly of the radio l Installation of Optional Retrofit Kit l Installation of Option Boards 3.2 Preventive Maintenance The radios do not require a scheduled preventive maintenance program; however, periodic visual inspection and cleaning is recommended. 3.2.1 Inspection Check that the external surfaces of the radio are clean, and that all external controls and switches are functional. It is not recommended to inspect the interior electronic circuitry. 3.2.2 Cleaning Procedures The following procedures describe the recommended cleaning agents and the methods to be used when cleaning the external and internal surfaces of the radio. External surfaces include the front cover, housing assembly, and battery case. These surfaces should be cleaned whenever a periodic visual inspection reveals the presence of smudges, grease, and/or grime. NOTE: Internal surfaces should be cleaned only when the radio is disassembled for service or repair. The only recommended agent for cleaning the external radio surfaces is a 0.5% solution of a mild dishwashing detergent in water. The only factory recommended liquid for cleaning the printed circuit boards and their components is isopropyl alcohol (70% by volume). ! CAUTION: Certain chemicals and their vapors can have harmful effects on certain plastics. Avoid using aerosol sprays, tuner cleaners, and other chemicals. C a u t i o n Cleaning External Plastic Surface Apply the 0.5% detergent-water solution sparingly with a stiff, non-metallic, short-bristled brush to work all loose dirt away from the radio. Use a soft, absorbent, lintless cloth or tissue to remove the solution and dry the radio. Make sure that no water remains entrapped near the connectors, cracks, or crevices Cleaning Internal Circuit Boards and Components Isopropyl alcohol (70%) may be applied with a stiff, non-metallic, short-bristled brush to dislodge embedded or caked materials located in hard-to-reach areas. The brush stroke should direct the