Motorola mbp36s User Guide - Page 11

2.3 Parent Unit Power Supply ENGLISH IMPORTANT Installing the rechargeable battery pack and charging it fully before use is recommended, to allow temporary operation of the parent unit in the event of a power failure or if the parent unit is moved. 1. Connect the small plug of the power adapter to the parent unit and the other end to the electrical outlet. Only use the enclosed power adapter (6V DC / 600mA) with the slightly smaller DC plug. 2. Press and hold the P POWER ON/OFF button to turn ON the parent unit. 3. Once the baby and parent units are switched on, the display on the parent unit will show the video captured by the baby unit. 4. If there is no connection or you are out of range, the video display will change to the Motorola screen with a flashing icon and the unit will beep about every 10 seconds. Move the parent unit closer to the baby unit until the link is re-established. 5. Press and hold the P POWER ON/OFF button to turn OFF the parent unit. NOTE The battery icon turns RED, the Power Indicator LED flashes RED and the unit emits a beep about every 10 seconds to indicate that the battery is low and needs to be recharged. The battery pack takes about 16 hours to charge fully. Getting Started 11