Motorola mbp36s User Guide - Page 16

4.5 Alarm 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted. 3. Press the O button to show the alarm Off / On setting. 4. Press the + UP button or - DOWN button to select Alarm ON, then press O and + UP or - DOWN to select the alarm time 6h, 5h, 4h, 3h, 2h. (The default setting is Alarm OFF.) 5. If an alarm time is selected will appear on the display and, after the alarm time is reached, the parent unit will beep about every 10 seconds and flash the alarm icon, until any button is pressed. 4.6 Camera Control 4.6.1 Add (pair) a camera 1. Press the M button of the parent unit and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted, and then press O for the Add/ Delete menu to appear. 3. Press the + UP button or - DOWN button to select Add, and press the OK button to confirm. 4. cam 1 / cam 2 / cam 3 / cam 4 will pop up, press the + UP button or - DOWN button to select the desired Camera and press the O button to start searching for a camera unit. The green ON / OFF LED will flash rapidly while searching. 5. Press and hold the PAIR button underneath the baby unit until the parent unit finds the camera, beeps and the video from the camera appears. NOTE You can only register a new camera to a camera number that is not already paired. Paired camera numbers are indicated by a *, such as cam*1. If the camera being paired was registered previously, it will lose the old registration when it is paired again. 16 Parent Unit Menu Options