Motorola mbp36s User Guide - Page 18
Temperature Setting, Power Saving mode
View all Motorola mbp36s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
4.7 Temperature Setting 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted. 3. Press the O button to show the temperature options. 4. The temperature setting / / will pop up. Temperature Format - to select either Centigrage or Fahrenheit . Temperature Limit to define the High temperature limit 77-99oF) and Low temperature limit (10-24oC/50-76oF). (25-37oC/ Temperature Alert - Turn the temperature alert ON, the Parent Unit will beep and display Temperature High or Temperature Low when the temperature at the Baby Unit is detected above or below the maximum or minimum temperature limits you set. 5. Press the + UP button or - DOWN button to select your setting and confirm by pressing the O button. 4.8 Power Saving mode 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until V is highlighted. 3. Press the O button to show the power saving options. 4. Press the + UP button or - DOWN button to select for the parent unit video to turn off after 5 mins, 30 mins or 60 mins if no buttons have been pressed. 5. The audio will remain on, and you can press any button to turn the video screen back on. Note: If there are multiple cameras in scan mode, the audio will switch about every 30 seconds. 18 Parent Unit Menu Options