NEC 42XP10 42PX10 50XP10 60XP10 user's manual - Page 31
Control sequence, Operation commands
UPC - 805736019414
View all NEC 42XP10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
English 3) Control sequence 1) The command from a computer to the Plasma monitor will take 400ms. 2) The Plasma monitor will send a return command 400ms* after it has received an encode. If the command is not received correctly, the Plasma monitor will not send the return command. 3) The personal computer checks the command and confirms if the command which has been sent has been executed or not. 4) This Plasma monitor sends various codes other than the return code. When sending a control sequence via RS-232C, other codes from personal computers will be ignored. *The sending time of the return command may be delayed depending on the monitor's current activity (changing of the input signal, etc.). [Example] Turn the power ON. (' ' is for ASCII code) Sending commands from the PC etc. 30 30 21 0D '0' '0' '!' ' ' Status code from Plasma monitor 30 30 21 0D '0' '0' '!' ' ' Meaning Command for POWER ON Command received (Command echo back) 4) Operation commands Operation commands execute the basic operation setting of this Plasma monitor. It may not operate when changing the signal: Operation POWER ON POWER OFF INPUT VIDEO1 INPUT VIDEO2 INPUT S-VIDEO INPUT DVD/HD1 INPUT DVD/HD2 INPUT SCART3 INPUT VGA INPUT RGBHV INPUT DVI ASCII ! " _v1 _v4 _v3 _v2 _v5 _v6 _r2 _r3 _r1 HEX 21h 22h 5Fh 76h 31h 5Fh 76h 34h 5Fh 76h 33h 5Fh 76h 32h 5Fh 76h 35h 5Fh 76h 36h 5Fh 72h 32h 5Fh 72h 33h 5Fh 72h 31h • POWER OFF command should not be used less than 1 minute after the power is turned on. • POWER ON command should not be used less than 1 minute after the power is turned off. RS-232C - continued English-28