NEC FZ110A User Guide - Page 8
Special, Information, Windows, Users
UPC - 102645813929
View all NEC FZ110A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Special Information for Windows NT Users How to Install or Reinstall Zip Tools Software ■ IMPORTANT! You must have administrator privileges for your local computer in order to install software drivers under Windows NT. You must also have administrator privileges for your computer to run the ToolsNT utilities. ■ To install your Zip Tools software, insert the 100MB "Tools" disk that came with your system into the Zip drive, and insert the Zip Install diskette for Windows NT into the computer's floppy drive. You may need to run SetupNT.exe twice from the Install diskette - once to install the Iomega Zip IDE/ATAPI driver, the second time to install ToolsNT software. ■ Reinstalling Windows NT: IF you reinstall Windows NT, you must also reinstall the !omega ATAPI driver and ToolsNT software. If you do not reinstall the Zip Tools software, disks will not format correctly in your Zip drive and/or the Zip drive will appear as a floppy drive (b:). ■ Installing Zip Tools Software under Windows NT 4.0: 1. Run a:\setupnt.exe from the Windows NT Install diskette. • If the SetupNT program is unable to locate the "Tools" disk, make sure it is fully inserted and click "OK". If SetupNT is still unable to locate the "Tools" disk, click "OK" again and SetupNT will automatically open the "SCSI Adapters" Control Panel so that you can install the Iomega Zip IDE/ATAPI deriver.** Continue to step 2. ■ **NOTE: Windows NT installs drives or adapters that use the IDE interface as SCSI adapters. ■ • If the necessary driver is already present on the system, SetupNT will be able to locate the "Tools" disk and install ToolsNT software. After Windows NT reboots, the Zip ATAPI drive will be ready to use. 2. Select the "Drivers" tab and click the "Add" button. 3. When the list of Iomega adapters appears, double-click the Iomega Zip IDE/ ATAPI driver. 4. Choose "Current" in the Windows NT dialog box. Windows NT will then add the Zip ATAPI driver to the list of installed drivers found on your system. 5. At the next Windows NT dialog box, select "Yes" to reboot the system. Remove the install diskette from the floppy drive while Windows NT reboots. 6