NEC FZ110A User Guide - Page 9
Installing, Tools, Software, under, Windows
UPC - 102645813929
View all NEC FZ110A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
IN um ioj. °Jul 6. After Windows NT reboots, run SetupNT again from the Install diskette to install the ToolsNT software package. ■ IMPORTANT! If the SetupNT program still cannot locate the "Tools" disk, refer to the NTReadme.txt file on the Install diskette for instructions on manually installing the driver. ■ Installing Zip Tools Software under Windows NT 3.51: 1. Run a:\setupnt.exe from the Windows NT Install diskette. • If the SetupNT program is unable to locate the "Tools" disk, make sure it is fully inserted and click "OK". If SetupNT is still unable to locate the "Tools" disk, click "OK" again and SetupNT will automatically run the "Windows NT Setup" program so that you can install the Iomega Zip IDE/ATAPI driver. Continue to step 2. • If the necessary driver is already present on the system, SetupNT will be able to locate the "Tools" disk and install ToolsNT software. After Windows NT reboots, the Zip ATAPI drive will be ready to use. 2. From the Windows NT Setup window, choose the Options pull-down menu and select "Add/Remove SCSI adapters". ■ NOTE: Windows NT installs drives or adapters that use the IDE interface as SCSI adapters. ■ 3. When the list of adapters appears, click "Add", then click "OK" in the message box. 4. Click the down arrow next to the window for "Select SCSI Adapter Option" to open the adapter list. 5. Scroll down the list of adapters and select the Iomega Zip IDE/ATAPI driver. 6. Click the "Install" button. 7. Choose "Current" in the Windows NT dialog box. Windows NT will then add the necessary driver to the list of installed adapters found by the operating system. 8. Click the button for "Close" and exit Windows NT Setup. 9. Click "OK" and reboot the system. Remove the Install diskette from the floppy drive while Windows NT reboots. 10. After Windows NT reboots, run SetupNT again from the Install diskette to install the ToolsNT software package. ■ IMPORTANT! If the SetupNT program still cannot locate the "Tools" disk, refer to the NTReadme.txt file on the Install diskette for instructions on manually installing the driver. ■ Continued on the next page ... 7