NEC LT154 User Manual - Page 27

Basic Operation Selecting the computer or video source: Optimizing RGB image automatically Press the Auto Adjust button to optimize an RGB image automatically. SOURCE AUTO ADJUST Each time the Source button is pressed, the input source will change as follows: → RGB ["DVI (DIGITAL) → DVI (ANALOG)" on LT156] → Video  PC Card Viewer ← S-Video  If no input signal is present, the input will be skipped. VIDEO S-VIDEO AUTO ADJ. RGB 1 RGB 2 PJ HELP POINTER PC CARD OFF ON VIDEO S-VIDEO AUTO ADJ. RGB 1 RGB 2 PJ MENU LASER SOURCE AUTO ADJUST Press the Auto Adjust button to fine-tune the computer image or to remove any vertical banding that might appear and to reduce video noise, dot interference or cross talk (this is evident when part of your image appears to be shimmering). This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This function also adjusts the clock phase to reduce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.) This adjustment may be necessary when you connect your computer for the first time. NOTE: The Auto Adjust function does not work for component signal. On LT156: Press the RGB 1 button on the remote control to select DVI digital signal and the RGB 2 button for DVI analog signal. Source display E - 27