NEC LT154 User Manual - Page 49
Cleaning or Replacing the Filters - replacement
![]() |
UPC - 050927232534
View all NEC LT154 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Cleaning or Replacing the Filters The air-filter sponge keeps the inside of the MultiSync LT156/LT155/ LT154 Projector free from dust or dirt and should be cleaned after every 100 hours of operation (more often in dusty conditions). If the filter is dirty or clogged, your projector may overheat. CAUTION • Turn off the power and unplug the projector before replacing the filter. • Only clean the outside of the filter cover with a vacuum cleaner. • Do not attempt to operate the projector without a filter cover. • Your projector will not operate unless the filter cover is installed cor- rectly. To clean the air-filter: Vacuum the filter-through the filter cover. ENTER RCE SELECT CANCEL MENU To replace the air-filter: 1. Remove the filter cover by pushing down on the catch of the cover until you feel it detach. 2 1 2. Reinstall the new filter cover. NOTE: Do not detach the sponge from the filter cover. Do not wash the filter cover with soap and water. Soap and water will damage the the filter membrane. Before replacing the filter cover, remove dust and dirt from the projector cabinet. Keep out dust and during filter replacement. E - 49
![](/manual_guide/products/nec-lt154-user-manual-5d923fb/49.png)