NaceCare TTV678 TTV678 Owners Manual (External Charger) - Page 10

Machine Set Up Setting the width adjustment Fig.13 First push the side pod in (see Fig.13), then pull the side pod adjustment lever and set it to one of the three width-settings (see Fig.13a) Repeat the operation on both sides. Fig.13a 650mm 750mm 850mm Filling the clean water tank The TTV-678 is equipped with a large capacity 110 litre clean-water tank allowing, for large areas to be covered in a single fill. Fig.14 Fig.15 Fig.16 To fill the clean-water tank, lift the cover flap (Fig.14) to expose the filler cap. Unscrew the filler cap (Fig.15) and fill the tank using a hose (Fig.16) or preferred method. Note: Great care must be taken to ensure that contaminants (leaves, hair, dirt, etc.) are not allowed to enter the clean-water tank during the filling process. If using a bucket or similar, ensure it is always clean and free from debris. Fill-level indicator The water level in the clean water tank can be measured using the scale on the rear of the machine (Fig.16a). Fig.16a 10