NaceCare TTV678 TTV678 Owners Manual (External Charger) - Page 7

Quick Set Up Guide ! Please read before commencing any operation. After the removal of all the packaging, carefully open and check the contents of the start up pack (Fig.1). ! 1 Contents: 1 x Operator Manual 2 x Keys 4 x 40 amp fuses (1 x spare) 2 x Side pod skirts 1 x Brake disengage key 1 x Maxi fuse-puller 2 Fig.1a Fig.2 Fig.1 Fig.2a Lift top tank assembly to reveal battery compartment. Always lift between points as illustrated to ensure personal safety (Fig.1a). Fit battery fuses (contained in start-up pack) into the battery fuse holders as illustrated (Fig.2). Remove transit block from pallet (fig 2a). Note: Ensure that no metal objects come into contact with battery terminals while the batteries are exposed. When inserting the first fuse you may notice a spark, this is normal. 3 Insert key (Fig.3) into ignition and turn quarter-turn clockwise to the 'On' position. Ensure that the forward/reverse switch is set to forward (Fig.4). Depress accelerator pedal with right foot and slowly drive machine off of the pallet using the ramp provided (Fig.5). Note: The seat is fitted with a pressure sensor that disables the machine until an operator is seated. When the machine is removed and in a safe position, turn key back to the off position (Fig.6). 7 Fig.6