Home » Netgear Manuals » Bridges & Routers » Netgear AC1000-WiFi » Manual Viewer

Netgear AC1000-WiFi User Manual - Page 67

Wpa-psk [tkip] + Wpa2-psk [aes], Wpa2-psk [aes]

View all Netgear AC1000-WiFi manuals

Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

AC1000 WiFi Router Model R6080 (Continued) Field Description Allow guests to see each other and access my local network By default, WiFi clients that are connected to the 2.4 GHz WiFi band of the guest WiFi network cannot access WiFi devices or Ethernet devices that are connected to the main WiFi network. To allow access to the main WiFi network, select the Allow guests to see each other and access my local network check box. Security Options If you want to change the WiFi security, select one of the following WiFi security options for the 2.4 GHz band of the guest WiFi network: • None. An open WiFi network that does not provide any security. Any WiFi device can join the 2.4 GHz band of the guest WiFi network. This is the default setting for the guest WiFi network. • WEP. Wired Equivalent Privacy (WEP) security is a legacy authentication and data encryption mode that is superseded by WPA-PSK and WPA2-PSK. The WEP option displays only if you configure the WiFi mode for the main WiFi network as Up to 54 Mbps in the 2.4 GHz band (see View or Change the Basic WiFi Settings and WiFi Security Settings on page 52). For information about configuring WEP, see Configure WEP Legacy WiFi Security on page 59. • WPA2-PSK [AES]. WPA2 provides a secure and fast connection but some older WiFi devices do not detect WPA2 and support only WPA. Select WPA2-PSK [AES] security to allow 802.11n devices to connect to the 2.4 GHz band of the guest WiFi network at the fastest speed. If your network includes older devices that do not support WPA2, select WPA-PSK [TKIP] + WPA2-PSK [AES] security. To use WPA2 security, in the Passphrase field, enter a phrase of 8 to 63 characters. To join the 2.4 GHz band of the guest WiFi network, a user must enter this passphrase. • WPA-PSK [TKIP] + WPA2-PSK [AES]. This type of security enables WiFi devices that support either WPA or WPA2 to join the 2.4 GHz band of the guest WiFi network. However, WPA-PSK [TKIP] is less secure than WPA2-PSK [AES] and limits the speed of WiFi devices to 54 Mbps. To use WPA + WPA2 security, in the Passphrase field, enter a phrase of 8 to 63 characters. To join the 2.4 GHz band of the guest WiFi network, a user must enter this passphrase. Passphrase The passphrase that provides users access to the guest WiFi network in the 2.4 GHZ band. The passphrase is also referred to as the password or key. Wireless Network (5GHz a/n/ac) Name (SSID) The SSID is the 5 GHz WiFi band name. If you did not change the SSID, the default SSID displays, which is NETGEAR-5G_Guest. To change the SSID in the 5 GHz WiFi band for the guest WiFi network, enter a 32-character (maximum), case-sensitive name in this field. Manage the Basic WiFi Network 67 Settings User Manual

Section	Page
Contents	3
1. Hardware Overview of the Router	8
Unpack Your Router	9
LED Descriptions	11
Ports, Buttons, and Connectors on the Back Panel	11
Router Label	13
Position the Router	13
Cable Your Router	14
2. Connect to the Network and Access the Router	16
Connect to the Router	17
Connect to the Router Through an Ethernet Cable	17
Join the WiFi Network of the Router	17
Manual Method	17
Wi-Fi Protected Setup Method	18
Types of Logins	19
Use a Web Browser to Access the Router	19
Automatic Internet Setup	19
Log In to the Router	21
Change the Language	21
3. Specify Your Internet Settings	22
Use the Internet Setup Wizard	23
Manually Set Up the Internet Connection	23
Specify an Internet Connection Without a Login	23
Specify an Internet Connection That Uses a Login and PPPoE Service	25
Specify an Internet Connection That Uses a Login and PPTP Service	27
Specify an Internet Connection That Uses a Login and L2TP Service	28
Specify an IPv6 Internet Connection	30
IPv6 Internet Connections and IPv6 Addresses	30
Use Auto Detect for an IPv6 Internet Connection	31
Use Auto Config for an IPv6 Internet Connection	32
Set Up an IPv6 6to4 Tunnel Internet Connection	34
Set Up an IPv6 Pass-Through Internet Connection	35
Set Up a Fixed IPv6 Internet Connection	36
Set Up an IPv6 DHCP Internet Connection	37
Set Up an IPv6 PPPoE Internet Connection	38
Manage the MTU Size	40
MTU Concepts	40
Change the MTU Size	41
4. Control Access to the Internet	43
Enable access control to allow or block access to the Internet	44
Manage network access control lists	45
Use Keywords to Block Internet Sites	46
Set Up Blocking	46
Remove a Keyword or Domain From the Blocked List	47
Remove All Keywords and Domains From the Blocked List	48
Specify a Trusted Computer	48
Set Up a Schedule for Keyword Blocking and Outbound Firewall Rules	49
5. Manage the Basic WiFi Network Settings	51
Manage the Basic WiFi Settings and WiFi Security of the Main Network	52
View or Change the Basic WiFi Settings and WiFi Security Settings	52
Configure WEP Legacy WiFi Security	59
Configure WPA/WPA2 Enterprise WiFi Security	61
Use WPS to Add a Device to the WiFi Network	63
Use WPS With the Push Button Method	63
Use WPS With the PIN Method	64
Manage the Basic WiFi Settings and WiFi Security of the Guest Network	65
Enable or Disable the WiFi Radios	69
6. Manage the WAN and LAN Network Settings	70
View or Change WAN Settings	71
Set Up a Default DMZ Server	72
Manage IGMP Proxying	73
Manage VPN Pass-Through	73
Manage NAT Filtering	74
Manage the SIP Application-Level Gateway	75
Manage the LAN IP Address Settings	76
Manage the Router Information Protocol Settings	77
Manage the DHCP Server Address Pool	78
Manage Reserved LAN IP Addresses	79
Reserve a LAN IP Address	79
Change a Reserved IP Address	80
Remove a Reserved IP Address Entry	80
Disable the Built-In DHCP Server	81
Change the Router’s Device Name	82
Set Up and Manage Custom Static Routes	83
Set Up a Static Route	83
Change a Static Route	85
Remove a Static Route	85
Set Up a Bridge for a Port Group or VLAN Tag Group	86
Set Up a Bridge for a Port Group	86
Set Up a Bridge for a VLAN Tag Group	87
Improve Network Connections With Universal Plug-N-Play	89
7. Manage the Router	91
Update the Firmware of the Router	92
Check for New Firmware and Update the Router	92
Manually Upload New Firmware and Update the Router	93
Change the admin Password	94
Set Up Password Recovery	95
Recover the admin Password	96
Manage the Configuration File of the Router	96
Back Up the Settings	96
Restore the Settings	97
Return the Router to Its Factory Default Settings	98
Use the Reset Button	98
Erase the Settings	99
View the Status and Statistics of the Router	100
View Information About the Router and the Internet and WiFi Settings	100
Display Internet Port Statistics	101
Check the Internet Connection Status	102
Manage the Activity Log	103
View, Email, or Clear the Logs	103
Specify Which Activities Are Logged	104
View Devices Currently on the Network	104
8. Manage the Advanced WiFi Features	106
Set Up a WiFi Schedule	107
Manage the WPS Settings	108
Manage Advanced WiFi Settings	109
Use the Router as a WiFi Access Point Only	110
9. Manage Port Forwarding and Port Triggering	112
Manage Port Forwarding to a Local Server for Services and Applications	113
Forward Incoming Traffic for a Default Service or Application	113
Add a Port Forwarding Rule With a Custom Service or Application	114
Change a Port Forwarding Rule	115
Remove a Port Forwarding Rule	116
Application Example: Make a Local Web Server Public	117
How the Router Implements the Port Forwarding Rule	117
Manage Port Triggering for Services and Applications	118
Add a Port Triggering Rule	118
Change a Port Triggering Rule	120
Remove a Port Triggering Rule	120
Specify the Time-Out for Port Triggering	121
Disable Port Triggering	122
Application Example: Port Triggering for Internet Relay Chat	122
10. Troubleshooting	124
Reboot the Router From Its Web Interface	125
Quick Tips	125
Sequence to Restart Your Network	125
Check Ethernet Cable Connections	126
WiFi Settings	126
Network Settings	126
Troubleshoot With the LEDs	126
Standard LED Behavior When the Router Is Powered On	126
Power LED Is Off or Blinking	127
Power LED Stays Amber	127
Internet or Ethernet LEDs Are Off	127
WiFi LED Is Off	128
You Cannot Log In to the Router	128
You Cannot Access the Internet	129
Check the WAN IP Address	129
Troubleshoot PPPoE	130
Troubleshoot Internet Browsing	131
Changes Are Not Saved	132
Troubleshoot WiFi Connectivity	132
Troubleshoot Your Network Using the Ping Utility	133
Test the LAN Path to Your Router	133
Test the Path From Your Computer to a Remote Device	134
A. Supplemental Information	135
Factory Settings	136

Match case Limit results 1 per page

(Continued)

Description

Field

By default, WiFi clients that are connected to the 2.4 GHz WiFi band of the guest WiFi

network cannot access WiFi devices or Ethernet devices that are connected to the

main WiFi network. To allow access to the main WiFi network, select the

Allow guests

to see each other and access my local network

check box.

Allow guests to see

each other and access

my local network

Security Options

If you want to change the WiFi security, select one of the following WiFi security options for the 2.4 GHz band

of the guest WiFi network:

•

None

. An open WiFi network that does not provide any security. Any WiFi device can join the 2.4 GHz band

of the guest WiFi network. This is the default setting for the guest WiFi network.

•

WEP

. Wired Equivalent Privacy (WEP) security is a legacy authentication and data encryption mode that is

superseded by WPA-PSK and WPA2-PSK. The

WEP

option displays only if you configure the WiFi mode

for the main WiFi network as Up to 54 Mbps in the 2.4 GHz band (see View

Change

the

Basic

WiFi

Settings

and

WiFi

Security

Settings

on page 52). For information about configuring WEP, see Configure

WEP

Legacy

WiFi

Security

on page 59.

•

WPA2-PSK [AES]

. WPA2 provides a secure and fast connection but some older WiFi devices do not detect

WPA2 and support only WPA. Select WPA2-PSK [AES] security to allow 802.11n devices to connect to the

2.4 GHz band of the guest WiFi network at the fastest speed. If your network includes older devices that

do not support WPA2, select WPA-PSK [TKIP] + WPA2-PSK [AES] security.

To use WPA2 security, in the

Passphrase

field, enter a phrase of 8 to 63 characters. To join the 2.4 GHz

band of the guest WiFi network, a user must enter this passphrase.

•

WPA-PSK [TKIP] + WPA2-PSK [AES]

. This type of security enables WiFi devices that support either WPA

or WPA2 to join the 2.4 GHz band of the guest WiFi network. However, WPA-PSK [TKIP] is less secure than

WPA2-PSK [AES] and limits the speed of WiFi devices to 54 Mbps.

To use WPA + WPA2 security, in the

Passphrase

field, enter a phrase of 8 to 63 characters. To join the

2.4 GHz band of the guest WiFi network, a user must enter this passphrase.

The passphrase that provides users access to the guest WiFi network in the 2.4 GHZ

band. The passphrase is also referred to as the

password

key

Passphrase

Wireless Network (5GHz a/n/ac)

The SSID is the 5 GHz WiFi band name. If you did not change the SSID, the default

SSID displays, which is NETGEAR-5G_Guest.

To change the SSID in the 5 GHz WiFi band for the guest WiFi network, enter a

32-character (maximum), case-sensitive name in this field.

Name (SSID)

User Manual

Manage the Basic WiFi Network

Settings

AC1000 WiFi Router Model R6080