Netgear D7800 Installation Guide - Page 4
The LEDs on the top of the modem router light to indicate, modem router activity - firmware
View all Netgear D7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
LEDs The LEDs on the top of the modem router light to indicate modem router activity: LED Description Power LED • Solid white. The modem router is ready. • Solid amber. The modem router is starting. • Blinking amber. The firmware is upgrading, or the Reset button was pressed. • Blinking white. The firmware is corrupted. • Off. Power is not supplied to the modem router. DSL LED • Solid white. The modem router is connected to a DSL service and the DSL connection is ready. • Blinking amber. The modem router is negotiating the best possible speed on the DSL line. • Off. The modem router is not connected to a DSL service or a DSL connection is not established. 2.4 GHz WiFi LED • Solid white. The 2.4 GHz WiFi radio is operating. • Blinking white. The modem router is sending or receiving WiFi traffic. • Off. The 2.4 GHz WiFi radio is off. 5 GHz WiFi LED • Solid white. The 5 GHz WiFi radio is operating. • Blinking white. The modem router is sending or receiving WiFi traffic. • Off. The 5 GHz WiFi radio is off. USB 3.0 port 1 LED USB 3.0 port 2 LED • Solid white. A USB storage device is connected and is ready. • Blinking white. A USB storage device is plugged in and is trying to connect. • Off. No USB storage device is connected, or someone clicked the Safely Remove Hardware button and it is now safe to remove the attached USB storage device. 2