Netgear DM111PSPv2 DM111PSPv2 User Manual - Page 45
Automatic Firmware Checking On, To upgrade the firmware
View all Netgear DM111PSPv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Broadband ADSL2+ Modem DM111PSPv2 Automatic Firmware Checking On When automatic firmware checking is on, the modem performs the check and notifies you if an upgrade is available or not as shown here. Figure 9. Firmware upgrade assistant and results screen To upgrade the firmware: 1. Click Yes to allow the modem to download and install the new firmware. The upgrade process could take a few minutes. When the upload is complete, your modem restarts. 2. Go to the DM111PSPv2 support page at http://www.netgear.com/support, and read the new firmware release notes to determine whether you need to reconfigure the modem after upgrading. Note: If you get a "Firmware needs to be reloaded" message, it means a problem has been detected with the modem's firmware. Follow the prompts to correct the problem, or see Firmware Needs to Be Reloaded on page 72 for a description of the steps. Network Maintenance 45