Netgear FM114P FR114W Reference Manual - Page 27
The Firewall’s Front Panel, the front panel of the firewall. These LEDs are green when lit
UPC - 606449024029
View all Netgear FM114P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall The Firewall's Front Panel The front panel of the NETGEAR ProSafe Firewall contains status LEDs. The FR114P front panel is shown in Figure 2-1 Figure 2-1. FR114P Front Panel You can use some of the LEDs to verify connections. Table 2-1 lists and describes each LED on the front panel of the firewall. These LEDs are green when lit, except for the TEST LED, which is amber. Table 2-1. LED Descriptions Label POWER TEST PRINTER ACT ALERT INTERNET 100 (100 Mbps) LINK/ACT (Link/Activity) LOCAL 100 (100 Mbps) LINK/ACT (Link/Activity) WLAN Activity Description On Power is supplied to the firewall. On The system is initializing. Off The system is ready and running. (These LEDs present only on FR114P and FM114P) Blinking Data is being transmitted or received by the Printer port. On (Amber) The connected printer is offline, is out of paper, or has a paper jam. On Off On Blinking The Internet (WAN) port is operating at 100 Mbps. The Internet (WAN) port is operating at 10 Mbps. The Internet port has detected a link with an attached device. Data is being transmitted or received by the Internet port. On Off On Blinking On The Local port is operating at 100 Mbps. The Local port is operating at 10 Mbps. The Local port has detected a link with an attached device. Data is being transmitted or received by the Local port. The Wireless (WLAN) port is operating (FR114W and FM114P) Setting Up the Hardware 2-3