Netgear FS728TLP Hardware Installation Guide - Page 7
IEEE 802.3af Power over Ethernet, Per-port LEDs and system LEDs.
View all Netgear FS728TLP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ProSAFE Fast Ethernet PoE Smart Switch FS728TLP • The switch provides full compatibility with IEEE standards: - IEEE 802.3i (10BASE-T) - IEEE 802.3u (100BASE-TX, 100BASE-FX) - IEEE 802.3x (full-duplex flow control) - IEEE 802.3z (1000BASE-X) - IEEE 802.3ab (1000BASE-T) - IEEE 802.3af (Power over Ethernet) - IEEE 802.3az (EEE) • Autosensing and autonegotiating capabilities for all ports. • Auto MDI/MIDX technology is supported on all ports. • Automatic address-learning function to build the packet-forwarding information table. The table contains up to 8 K Media Access Control (MAC) addresses. • Full- and half-duplex functions for all 10/100/1000 Mbps ports. • Store-and-forward transmission to remove corrupt packets from the network. • Full-duplex IEEE 802.3x pause frame flow control. • Active flow control to minimize packet loss and frame drops. • Half-duplex back-pressure control. • Per-port LEDs and system LEDs. • Internal power supply. • Standard 1U high, rack-mountable 19-inch chassis. • Fan speed control. • Support for the Power over Ethernet (PoE). PoE is supported on ports 1 through 12 with a total power budget of 100W PoE. For example, the switch can support 15.4W for 6 ports or 8W for 12 ports. The switch uses data pairs (RJ-45 1, 2, 3, and 6 PIN) to deliver the power. Introduction and Hardware Description 7