Netgear FS750AT FS750 Reference Manual - Page 32

Troubleshooting

Get Netgear FS750AT - Modular Fast Ethernet Switch PDF manuals and user guides
UPC - 606449028058
View all Netgear FS750AT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

CHAPTER 5: TROUBLESHOOTING This chapter provides guidance in troubleshooting the NETGEAR FS726 and FS750 Switches. Information includes: • Troubleshooting information table • Additional troubleshooting suggestions Troubleshooting Chart Table 5-1 lists symptoms, causes, and solutions of possible problems. Table 5-1. Troubleshooting Chart Symptom Power LED is off. Cause No power is received Link LED is off or intermittnet. Port connection is not working Solution Check the power cord connections for the switch at the switch. and the connected device. Make sure all cables used are correct and comply with Ethernet specifications. Check the crimp on the connectors and make sure that the plug is properly inserted and locked into the port at both the switch and the connecting device. Make sure all cables used are correct and comply with Ethernet specifications. See Appendix C. Check for a defective adapter card, cable, or port by testing them in an alternate environment where all products are functioning. troubleshooting 5-1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
5-1
troubleshooting
CHAPTER 5:TROUBLESHOOTING
This chapter provides guidance in troubleshooting the NETGEAR FS726 and FS750
Switches. Information includes:
•
Troubleshooting information table
•
Additional troubleshooting suggestions
Troubleshooting Chart
Table 5-1 lists symptoms, causes, and solutions of possible problems.
Table 5-1.Troubleshooting Chart
Symptom
Cause
Solution
Power
LED is off.
No power is received
Check the power cord connections
for the switch at the switch. and the
connected device.
Make sure all cables used are
correct and comply with Ethernet
specifications.
Link
LED is off
Port connection is not working
Check the crimp on the connectors
or intermittnet.
and make sure that the plug is
properly inserted and locked into the
port at both the switch and the
connecting device.
Make sure all cables used are
correct and comply with Ethernet
specifications. See Appendix C.
Check for a defective adapter card,
cable, or port by testing them in an
alternate environment where all
products are functioning.