Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 403

Managed Switch CLI Manual, Release 8.0 show sflow agent The sFlow agent collects time-based sampling of network interface statistics and flow-based samples. These are sent to the configured sFlow receivers. Use this command to display the sFlow agent information. Format Mode show sflow agent Privileged EXEC Field sFlow Version IP Address Description Uniquely identifies the version and implementation of this MIB. The version string must have the following structure: MIB Version; Organization; Software Revision where: • MIB Version: '1.3', the version of this MIB. • Organization: Netgear. • Revision: 1.0 The IP address associated with this agent. Example: The following shows example CLI display output for the command. (switch) #show sflow agent sFlow Version 1.3;Netgear;1.0 IP Address 10.131.12.66 show sflow pollers Use this command to display the sFlow polling instances created on the switch. Use "-" for range. Format Mode show sflow pollers Privileged EXEC Field Description Poller Data Source Receiver Index The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical ports only. The sFlowReceiver associated with this sFlow counter poller. Utility Commands v1.0, July 2009 6-86