Netgear FSM726v3 7200 managed switch v8.x CLI reference manual - Page 55

Managed Switch CLI Manual, Release 8.0 If you specify 0 (defined as the default CIST ID) as the , this command sets the Bridge Priority parameter to a new value for the common and internal spanning tree. The bridge priority value is a number within a range of 0 to 61440. The twelve least significant bits are masked according to the 802.1s specification. This causes the priority to be rounded down to the next lower valid priority. Default Format Mode 32768 spanning-tree mst priority Global Config no spanning-tree mst priority This command sets the bridge priority for a specific multiple spanning tree instance to the default value. The parameter is a number that corresponds to the desired existing multiple spanning tree instance. If 0 (defined as the default CIST ID) is passed as the , this command sets the Bridge Priority parameter for the common and internal spanning tree to the default value. Format Mode no spanning-tree mst priority Global Config spanning-tree mst vlan This command adds an association between a multiple spanning tree instance and one or more VLANs so that the VLAN(s) are no longer associated with the common and internal spanning tree. The parameter is a number that corresponds to the desired existing multiple spanning tree instance. The vlan range can be specified as a list or as a range of values. To specify a list of VLANs, enter a list of VLAN IDs, each separated by a comma with no spaces in between. To specify a range of VLANs, separate the beginning and ending VLAN ID with a dash ("-"). Format Mode spanning-tree mst vlan Global Config Switching Commands v1.0, July 2009 3-19