Netgear FSM7326P FSM7326P User Manual - Page 188
area virtual-link authentication, area virtual-link dead-interval, Default, Format - default password
UPC - 606449031072
View all Netgear FSM7326P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software area virtual-link authentication This command configures the authentication type and key for the OSPF virtual interface identified by and . The parameter is the IP address of the neighbor. The value for is either none, simple, or encrypt. The [key] is composed of standard displayable, non-control keystrokes from a Standard 101/102-key keyboard. The authentication key must be 8 bytes or less if the authentication type is simple. If the type is encrypt, the key may be up to 256 bytes. Unauthenticated interfaces do not need an authentication key. If the type is encrypt, a key id in the range of 0 and 255 must be specified. Default The default value for authentication type is none. Neither the default password key nor the default key id are configured. Format area virtual-link authentication {none | {simple } | {encrypt }} Mode Router OSPF Config no area virtual-link authentication This command configures the default authentication type for the OSPF virtual interface identified by and . The parameter is the IP address of the neighbor. Format no area virtual-link authentication Mode Router OSPF Config area virtual-link dead-interval This command configures the dead interval for the OSPF virtual interface on the virtual interface identified by and . The parameter is the IP address of the neighbor. The range for is 1 to 65535. Default 40 Format Mode area virtual-link dead-interval Router OSPF Config 9-6 Routing Commands 202-10009-01_060204