Netgear FSM7326P FSM7326P User Manual - Page 252
match source-address mac, match srcip, match srcl4port
UPC - 606449031072
View all Netgear FSM7326P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software The optional [not] parameter has the effect of negating this match condition for the class (i.e., match all IP Protocol numbers except for the one specified here). Default None Format match [not] protocol { | } Mode Class-Map Config match source-address mac This command adds to the specified class definition a match condition based on the source MAC address of a packet. The parameter is any layer 2 MAC address formatted as six, twodigit hexadecimal numbers separated by colons (e.g., 00:11:22:dd:ee:ff). The parameter is a layer 2 MAC address bit mask, which need not be contiguous, and is formatted as six, two-digit hexadecimal numbers separated by colons (e.g., ff:07:23:ff:fe:dc). The optional [not] parameter has the effect of negating this match condition for the class (i.e., match all source MAC addresses except for what is specified here). Default None Format match [not] source-address mac Mode Class-Map Config match srcip This command adds to the specified class definition a match condition based on the source IP address of a packet. The parameter specifies an IP address. The parameter specifies an IP address bit mask; note that although it resembles a standard subnet mask, this bit mask need not be contiguous. The optional [not] parameter has the effect of negating this match condition for the class (i.e., match all source IP addresses except for what is specified here). Default None Format match [not] srcip Mode Class-Map Config match srcl4port This command adds to the specified class definition a match condition based on the source layer 4 port of a packet using a single keyword or numeric notation or a numeric range notation. 10-10 CLI Commands: Differentiated Services 202-10009-01_060204