Netgear FSM7326P FSM7326P User Manual - Page 249
match dstip, match dstl4port
UPC - 606449031072
View all Netgear FSM7326P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software Default Format Mode None match [not] destination-address mac Class-Map Config match dstip This command adds to the specified class definition a match condition based on the destination IP address of a packet. The parameter specifies an IP address. The parameter specifies an IP address bit mask; note that although similar to a standard subnet mask, this bit mask need not be contiguous. The optional [not] parameter has the effect of negating this match condition for the class (i.e., match all destination IP addresses except for what is specified here). Default None Format match [not] dstip Mode Class-Map Config match dstl4port This command adds to the specified class definition a match condition based on the destination layer 4 port of a packet using a single keyword or numeric notation or a numeric range notation. To specify the match condition as a single keyword, the value for is one of the supported port name keywords. The currently supported values are: domain, echo, ftp, ftpdata, http, smtp, snmp, telnet, tftp, www. Each of these translates into its equivalent port number, which is used as both the start and end of a port range. To specify the match condition using a numeric notation, one layer 4 port number is required. The port number is an integer from 0 to 65535. To specify the match condition using a numeric range notation, two layer 4 port numbers are required and together they specify a contiguous port range. Each port number is an integer from 0 to 65535, but with the added requirement that the second number be equal to or greater than the first. The optional [not] parameter has the effect of negating this match condition for the class (i.e., match all destination layer 4 port numbers except for the one specified here). Default None CLI Commands: Differentiated Services 202-10009-01_060204 10-7