Netgear FSM7326P FSM7326P User Manual - Page 248
no match class-map, match destination-address mac, Restrictions, Default, Format
UPC - 606449031072
View all Netgear FSM7326P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software Restrictions The class types of both and must be identical (i.e., any vs. any, or all vs. all). A class type of acl is not supported by this command. Cannot specify the same as (i.e., self-referencing of class name not allowed). At most one other class may be referenced by a class. Any attempt to delete the class while still referenced by any shall fail. The combined match criteria of and must be an allowed combination based on the class type. Any subsequent changes to the class match criteria must maintain this validity, or the change attempt shall fail. The total number of class rules formed by the complete reference class chain (includes both predecessor and successor classes) must not exceed a platform-specific maximum. In some cases, each removal of a refclass rule reduces the maximum number of available rules in the class definition by one. no match class-map This command removes from the specified class definition the set of match conditions defined for another class. The is the name of an existing DiffServ class whose match conditions are being referenced by the specified class definition. Note: There is no [not] option for this match command. Default None Format no match class-map Mode Class-Map Config match destination-address mac This command adds to the specified class definition a match condition based on the destination MAC address of a packet. The parameter is any layer 2 MAC address formatted as six, two-digit hexadecimal numbers separated by colons (e.g., 00:11:22:dd:ee:ff). The parameter is a layer 2 MAC address bit mask, which need not be contiguous, and is formatted as six, two-digit hexadecimal numbers separated by colons (e.g., ff:07:23:ff:fe:dc). The optional [not] parameter has the effect of negating this match condition for the class (i.e., match all destination MAC addresses except for what is specified here). 10-6 CLI Commands: Differentiated Services 202-10009-01_060204