Netgear FSM7326P FSM7326P User Manual - Page 201
exit-overflow-interval, external-lsdb-limit, Restrictions, Default, Format
UPC - 606449031072
View all Netgear FSM7326P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software Restrictions Routed frames are always Ethernet encapsulated when a frame is routed to a VLAN. exit-overflow-interval This command configures the exit overflow interval for OSPF. It describes the number of seconds after entering Overflow state that a router will wait before attempting to leave the Overflow State. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow State until restarted. The range for is 0 to 2147483647 seconds. Default 0 Format exit-overflow-interval Mode Router OSPF Config no exit-overflow-interval This command configures the default exit overflow interval for OSPF. Format Mode no exit-overflow-interval Router OSPF Config external-lsdb-limit This command configures the external LSDB limit for OSPF. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches the external LSDB limit, the router enters overflow state. The router never holds more than the external LSDB limit non-default AS-external-LSAs in it database. The external LSDB limit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. The range for is -1 to 2147483647. Default -1 Format external-lsdb-limit Mode Router OSPF Config no external-lsdb-limit This command configures the default external LSDB limit for OSPF. Format no external-lsdb-limit Mode Router OSPF Config Routing Commands 202-10009-01_060204 9-19