Netgear FSM7328PS FSM7328PS Command line reference manual - Page 85

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches, 4.4 MAC Address and MAC Database Commands This section describes the commands you use to configure and view information about the system MAC address and the MAC address table. 4.4.1 network mac-address This command sets locally administered MAC addresses. The following rules apply: • Bit 6 of byte 0 (called the U/L bit) indicates whether the address is universally administered (b'0') or locally administered (b'1'). • Bit 7 of byte 0 (called the I/G bit) indicates whether the destination address is an individual address (b'0') or a group address (b'1'). • The second character, of the twelve character macaddr, must be 2, 6, A or E. A locally administered address must have bit 6 On (b'1') and bit 7 Off (b'0'). Format network mac-address Mode Privileged EXEC 4.4.2 network mac-type This command specifies whether the switch uses the burned in MAC address or the locally-administered MAC address. Default burnedin Format network mac-type {local | burnedin} Mode Privileged EXEC 4.4.2.1 no network mac-type This command resets the value of MAC address to its default. Format no network mac-type Mode Privileged EXE Port and System Setup Commands v3.0, January 2008 4-17