Netgear FVX538 FVX538 Reference Manual - Page 215
Traffic Metering Logs, Unicast Logs, ICMP Redirect Logs, Multicast/Broadcast Logs - cli commands
UPC - 606449037234
View all Netgear FVX538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
ProSafe VPN Firewall 200 FVX538 Reference Manual Traffic Metering Logs Table C-13. System Logs: Traffic Metering Message Explanation Recommended Action Jan 23 19:03:44 [TRAFFIC_METER] TRAFFIC_METER: Monthly Limit of 10 MB has reached for WAN1._ Traffic limit to WAN1 that was set as 10Mb has been reached. This stops all the incoming and outgoing traffic if configured like that in "When Limit is reached" on Traffic Meter web page. To start the traffic, restart the Traffic Limit Counter. Unicast Logs Table C-14. System Logs: Unicast Message Explanation Recommended Action Nov 24 11:52:55 [FVX538] [kernel] UCAST IN=SELF OUT=WAN SRC=192.168.10.1 DST=192.168.10.10 PROTO=UDP SPT=800 DPT=2049 • This packet (Unicast) is destined to the device from the WAN network. • For other parameters, refer to Table C-1. None ICMP Redirect Logs Table C-15. System Logs: Unicast, Redirect Message Explanation Recommended Action Feb 2007 22 14:36:07 [FVX538] [kernel] [LOG_PACKET] SRC=192.168.1.49 DST=192.168.1.124 PROTO=ICMP TYPE=5 CODE=1 • This packet is ICMP Redirect message sent to the router bye another router. • For other parameters, refer to Table C-1. To enable these logs, from CLI command prompt of the router, enter this command: monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 1 And to disable it, monitor/firewallLogs/logger/loggerConfig logIcmpRedirect 0 Multicast/Broadcast Logs Table C-16. System Logs: Multicast/Broadcast Message Jan 1 07:24:13 [FVX538] [kernel] MCAST-BCAST IN=WAN OUT=SELF SRC=192.168.1.73 DST=192.168.1.255 PROTO=UDP SPT=138 DPT=138 System Logs and Error Messages C-9 v1.0, March 2009