Netgear FVX538 FVX538 Reference Manual - Page 79
Total Number of Packets Dropped due to Session Limit, Percentage of Max Sessions
UPC - 606449037234
View all Netgear FVX538 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
ProSafe VPN Firewall 200 FVX538 Reference Manual To enable Session Limit: 1. Click the Yes radio button under Do you want to enable Session Limit? 2. From the User Limit Parameter drop-down list, define the maximum number of sessions per IP either as a percentage of maximum sessions or as an absolute. The percentage is computed on the total connection capacity of the device. 3. Enter the User Limit. If the User Limit Parameter is set to Percentage of Max Sessions, this is the maximum number of sessions allowed from a single source machine as a percentage of the total connection capacity. (Session Limit is per machine based.) Otherwise, if the User Limit Parameter is set to Number of Sessions, the user limit is an absolute value. Note: Some protocols (such as FTP or RSTP) create two sessions per connection which should be considered when configuring Session Limiting. The Total Number of Packets Dropped due to Session Limit field shows total number of packets dropped when session limit is reached. 4. In the Session Timeout section, modify the TCP, UDP and ICMP timeout values as you require. A session will expire if no data for the session is received for the duration of the timeout value. The default timeout values are 1200 seconds for TCP sessions, 180 seconds for UDP sessions, and 8 seconds for ICMP sessions. 5. Click Apply to save your settings. Firewall Protection and Content Filtering v1.0, March 2009 4-19