Netgear GS510TP GS510TP Hardware Installation Guide - Page 13
LED Designations, Port LEDs
View all Netgear GS510TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
NETGEAR GS510TP Smart Switch LED Designations Port LEDs Table 1 describes the RJ-45 and SFP port LED designations. There are two LEDs for each RJ-45 port. Each SFP port has its own indication LED. Table 1. Port LEDs LED Speed/Link/Activity PoE Status SFP Port Indicate LED Designation SPD/Link/ACT LED: • Off = No link is established on the port. • Solid Green = A valid 1000 Mbps link is established on the port. • Blinking Green = Packets transmission or reception is occurring on the port at 1000 Mbps. • Solid Yellow = A valid 10/100 Mbps link is established on the port. • Blinking Yellow = Packets transmission or reception is occurring on the port at 10/100 Mbps. PoE Status LED: • Off = No PoE powered device (PD) connected. • Solid Green = The PoE powered device is connected and the port is supplying power successfully. • Solid Yellow = Indicates one of the following failures resulted in stopping power to that port: Short circuit on PoE power circuit PoE power demand exceeds power available PoE current exceeds PD's classification Out of proper voltage band (44 ~ 57 VDC) • Off = No link is established on the port. • Solid Green = A valid link is established on the port. • Flashing Green = Packet transmission or reception is occurring on the port. Physical Description 13