Netgear GS724TP GS724TP Hardware manual - Page 13
IEEE 802.3af DTE Power via MDI, Per port LEDs, System LEDs. - gs724tps -
UPC - 606449051414
View all Netgear GS724TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
GS700TP Hardware Installation Guide • SFP types supported are: - 1000Base-SX - 1000Base-LX - 100Base - FX • The devices support full Netgear Smart Switch functionality and provide full compatibility with the following IEEE standards: - IEEE 802.3i, (10Base-T) - IEEE 802.3u (100Base-TX, 100Base-FX) - IEEE 802.3x (Full-duplex flow control) - IEEE 802.3ab (1000Base-T) - IEEE 802.3z (1000Base-X) - IEEE 802.3af (DTE Power via MDI) • Auto-sensing and auto-negotiating capabilities for all ports. • Auto Uplink™ on all ports to make the right connection. • Automatic address-learning function to build the packet-forwarding information table. The table contains up to 4K Media Access Control (MAC) addresses. • Full- and half-duplex functions for all 10/100/1000 Mbps ports. • Store-and-Forward transmission to remove bad packets from the network. • Full-duplex IEEE 802.3x pause frame flow control. • Active flow control to minimize packet loss/frame drops. • Half-duplex back-pressure control. • Per port LEDs, System LEDs. • Internal power supply. • Standard 1U high, rack mountable19" chassis. • Fan speed control supported (optional). • GS724TP supports the following POE functions: - Smart Power Managed function handles the power of each port in the event of limited available power. Introduction v1.0, November 2007 1-16