Netgear GS724TP GS724TP Hardware manual - Page 24

GS700TP Hardware Installation Guide Figure 3-4 illustrates the NETGEAR GS724TP Smart Switch back panel: Figure 3-4 The back panel contains the following: • A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for accommodating the supplied power cord. LED Designations This section provides an explanation for the following LED types: • Port LEDs • System LEDs Port LEDs The following table describes the port LED designations. Table 3-1. Port LEDs Port LED 24/48-10/100/1000 Ports SPD/Link/ACT LED - One LED/Port Designation • Off - No 10/100Mbps link is established on the port. • Solid Green - A valid 1000Mbps link is established on the port. • Flashing Green - Packet transmission or reception is occurring on the port at 1000Mbps. • Solid Yellow - A valid 10/100Mbps link is established on the port. • Flashing Yellow - Packet transmission or reception is occurring on the port at 10/100Mbps. 3-21 v1.0, November 2007 Physical Description