Home » Netgear Manuals » Hubs & Switches » Netgear GS724TP » Manual Viewer

Netgear GS724TP GS724TP Hardware manual - Page 27

SFP GBIC Module, Factory Defaults Button, The SFP GBIC bay accommodates a standard SFP GBIC module. - default password

UPC - 606449051414

Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

GS700TP Hardware Installation Guide SFP GBIC Module The GBIC module bays accommodate standard SFP GBIC modules, such as the AGM731F, AGM732F, or AGM733 from NETGEAR, allowing fiber connections on the network. The module bay is a combo port, sharing a connection with an RJ-45 port. Being a combo port, only one type of connection can be active at any given time. For example, both copper and fiber port cannot be used at the same time. If both connectors are plugged in at the same time, the fiber port becomes active. The SFP GBIC bay accommodates a standard SFP GBIC module. Factory Defaults Button The Smart Switch has a Factory default button to enable clearing the current configuration and returning the device back to the factory settings. This removes all settings, including the password, VLAN settings and port configurations. Physical Description v1.0, November 2007 3-24

Section	Page
GS700TP (724TP, 748TP) Series Hardware Installation Guide	1
Contents	5
About This Guide	7
Conventions, Formats and Scope	7
How to Use This Manual	8
How to Print this Manual	8
Revision History	9
Chapter 1 Introduction	10
Overview	10
Switch Features	12
Package Contents	14
Chapter 2 Installation	16
Step 1: Preparing the Site	16
Step 2: Installing the Switch	17
Installing the Switch on a Flat Surface	17
Installing the Switch in a Rack	17
Step 3: Checking the Installation	18
Step 4: Connecting Devices to the Switch	19
Step 5: Installing an SFP GBIC Module	19
Step 6: Applying AC Power	20
Step 7: Managing the Switch through a Web Browser or the PC Utility for Initial Configuration	21
Chapter 3 Physical Description	22
Front and Back Panel Configuration	22
GS724TP Front and Back Panels Configuration	22
GS748TP Front and Back Panels Configuration	23
LED Designations	24
Port LEDs	24
System LEDs	25
Device Hardware Interfaces	26
RJ-45 Ports	26
SFP GBIC Module	27
Factory Defaults Button	27
Appendix A Troubleshooting	28
Troubleshooting Chart	28
Additional Troubleshooting Suggestions	29
Network Adapter Cards	29
Configuration	29
Switch Integrity	29
Auto-negotiation	30
Appendix B Technical Specifications	31
Network Protocol and Standards Compatibility	31
Management	31
Interface	31
LEDs	31
Performance Specifications	31
Power Supply	32
Physical Specifications	32
Environmental Specifications	32
Electromagnetic Emissions	32
Electromagnetic Immunity	32
Safety	32
Modules	33

Match case Limit results 1 per page

GS700TP Hardware Installation Guide

Physical Description

3-24

v1.0, November 2007

SFP GBIC Module

The GBIC module bays accommodate standard SFP GBIC modules, such as the AGM731F,

AGM732F, or AGM733 from NETGEAR, allowing fiber connections on the network. The module

bay is a combo port, sharing a connection with an RJ-45 port. Being a combo port, only one type

of connection can be active at any given time. For example, both copper and fiber port cannot be

used at the same time. If both connectors are plugged in at the same time, the fiber port becomes

active.

The SFP GBIC bay accommodates a standard SFP GBIC module.

Factory Defaults Button

The Smart Switch has a Factory default button to enable clearing the current configuration and

returning the device back to the factory settings. This removes all settings, including the password,

VLAN settings and port configurations.