Netgear GS724Tv4 Hardware Installation Guide - Page 14
GS748T Front Panel Configuration, GS748T Back Panel Configuration
View all Netgear GS724Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
GS716T, GS724T and GS748T Gigabit Smart Switch GS748T Front Panel Configuration The GS748T has 48 10/100/1000 Mbps copper ports, two 1000 Mbps SFP combo ports, and two dedicated 1000 Mbps SFP fiber ports. The SFP combo ports are shared with copper ports 47 and 48. If the SFP combo ports are in use, copper ports 47 and 48 are inactive. Every RJ-45 port is capable of sensing the line speed and negotiating the operation duplex mode with the link partner automatically Figure 5 illustrates the NETGEAR GS748T Smart Switch front panel: System LEDs 10/100/1000 Mbps Ethernet Ports SFP Ports Figure 5. GS748T Front Panel The front panel contains the following: • 48 RJ-45 connectors for 10/100/1000 Mbps auto sensing Gigabit Ethernet switching ports. • Two SFP combo Gigabit Ethernet switching ports • Two dedicated 1000 Mbps SFP Gigabit Ethernet switching ports • Reset button to restart the device. • Recessed default reset button to restore the device back to the factory defaults. • Link, Speed, and Activity LEDs for each port • Power and FAN status LED GS748T Back Panel Configuration Figure 6 illustrates the NETGEAR GS748T Smart Switch back panel: Figure 6. GS748T Back Panel The back panel contains the following: Power Connector 10