Netgear GS724Tv4 Hardware Installation Guide - Page 23
Step 2: Install the Switch, Install the Switch on a Flat Surface
View all Netgear GS724Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
GS716T, GS724T and GS748T Gigabit Smart Switch Step 2: Install the Switch The NETGEAR GS716T,GS724T,GS748T Series Smart Switch can be installed on a flat surface or in a standard 19-inch rack. Install the Switch on a Flat Surface The switch ships with four self-adhesive rubber footpads. Stick one rubber footpad on each of the four concave spaces on the bottom of the switch. The rubber footpads cushion the switch against shock/vibrations. Install the Switch in a Rack To install the switch in a rack, use the following procedure (and see Figure 9, Rack Mount on page 19). To perform this procedure, the 17-inch rack-mount kit supplied with switch is required. 1. Attach the supplied mounting brackets to the side of the switch. 2. Insert the screws provided in the rack-mount kit through each bracket and into the bracket mounting holes in the switch. 3. Tighten the screws with a #1 Phillips screwdriver to secure each bracket. 4. Align the mounting holes in the brackets with the holes in the rack, and insert two pan-head screws with nylon washers through each bracket and into the rack. 5. Tighten the screws with a #2 Phillips screwdriver to secure the switch in the rack. Figure 9. Rack Mount 19