Netgear GS748Tv4 GS748Tv4 Hardware Installation Guide - Page 8
Features, Full NETGEAR Smart Switch functionality.
View all Netgear GS748Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
GS748T Smart Switch Hardware Installation Guide Features The following list identifies the key features of the GS748T: • Forty-eight 10/100/1000 Mbps auto-sensing Gigabit-Ethernet switching ports. • Two SFP combo ports. • Two dedicated 1000M SFP fiber ports. • Full NETGEAR Smart Switch functionality. • Full compatibility with IEEE standards: • IEEE 802.3i (10BASE-T) • IEEE 802.3u (100BASE-TX) • IEEE 802.3ab (1000BASE-T) • IEEE 802.3z (1000BASE-x) • IEEE 802.3x (Full-duplex flow control) • Autosensing and auto-negotiating capabilities for all ports. • Auto Uplink™ on all ports to make the right connection. • Automatic address learning function to build the packet-forwarding information table. The table contains up to 8K Media Access Control (MAC) addresses. • Store-and-Forward transmission to remove bad packets from the network. • Full-duplex IEEE 802.3x pause frame flow control. • Active flow control to minimize packet loss and frame drops. • Half-duplex backpressure control. • Per port LEDs and power LED. • Internal power supply. • Standard NETGEAR 7xx series chassis. • NETGEAR Green product series power-saving features: • Automatic power consumption adjustment based on the RJ-45 cable length. • Per port automatic power down when the port link is down. 8 | Chapter 1: Introduction