Netgear GS752TPSB GS7xxTS-TPS Software Admin Manual - Page 121
Auto-VoIP, Apply, Cancel, Restore Defaults, Switching
View all Netgear GS752TPSB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches 3. To modify information for an entry in the OUI list, select the check box next to the OUI prefix, update the OUI prefix or description, and then click Apply. 4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 5. Click Restore Defaults to restore the list to the preconfigured OUIs. Auto-VoIP The Auto-VoIP automatically makes sure that time-sensitive voice traffic is given priority over data traffic on ports that have this feature enabled. Auto-VoIP checks for packets carrying the following VoIP protocols: • Session Initiation Protocol (SIP) • H.323 • Skinny Client Control Protocol (SCCP) • Media Gateway Control Protocol (MGCP) VoIP frames that are received on ports that have the Auto-VoIP feature enabled are marked with CoS traffic class 6. To display the Auto-VoIP page, click Switching> Auto-VoIP. To configure Auto-VoIP settings: 1. To configure Auto-VoIP settings for a physical port, click the unit ID of the stack member with the ports to configure. 2. To configure Auto-VoIP settings for a Link Aggregation Group (LAG), click LAGS. 3. To configure Auto-VoIP settings for both physical ports and LAGs, click ALL. 121