Netgear GS752TPSB GS7xxTS-TPS Software Admin Manual - Page 141
IGMP Snooping Table, Admin Mode, Host Timeout, Max Response Time, MRouter Timeout
View all Netgear GS752TPSB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches 3. To configure IGMP Snooping settings for both physical ports and LAGs, click ALL. 4. Select the check box next to the port or LAG to configure. You can select multiple ports and LAGs to apply the same setting to the selected interfaces. Select the check box in the heading row to apply the same settings to all interfaces. 5. Configure the IGMP Snooping values for the selected port(s) or LAG(s): • Admin Mode. Use the menu to enable or disable the administrative mode of IGMP snooping on the selected interface(s). The default is Disable. • Host Timeout. Specify the amount of time you want the switch to wait for a report for a particular group on a particular interface before it deletes that interface from the group. Enter a value between 2 and 3600 seconds. The default is 260 seconds. • Max Response Time. Specify the amount of time you want the switch to wait after sending a query on an interface because it did not receive a report for a particular group on that interface. Enter a value greater or equal to 1 and less than the Host Timeout, in seconds. The default is 10 seconds. • MRouter Timeout. Specify the amount of time you want the switch to wait to receive a query on an interface before removing it from the list of interfaces with multicast routers attached. Enter a value between 0 and 3600 seconds. The default is 0 seconds. A value of zero indicates an infinite timeout; no expiration. • Fast Leave Admin Mode. Select the Fast Leave mode for a particular interface from the menu. The default is Disable. 6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 7. If you make any configuration changes, click Apply to apply the new settings to the switch. Configuration changes take effect immediately. IGMP Snooping Table Use the IGMP Snooping Table page to view all of the entries in the Multicast Forwarding Database that were created for IGMP snooping. To access the IGMP Snooping Table page, click Switching> Multicast > IGMP Snooping > IGMP Snooping Table. 141