Netgear GS752TPSB GS7xxTS-TPS Software Admin Manual - Page 144
IGMP Snooping Querier, IGMP Snooping Querier Configuration
View all Netgear GS752TPSB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches 3. To disable IGMP snooping on a VLAN and remove it from the list, select the check box next to the VLAN ID and click Delete. 4. To modify IGMP snooping settings for a VLAN, select the check box next to the VLAN ID, update the desired values, and click Apply. IGMP Snooping Querier IGMP snooping requires that one central switch or router periodically query all end-devices on the network to announce their multicast memberships. This central device is the IGMP querier. The IGMP query responses, known as IGMP reports, keep the switch updated with the current multicast group membership on a port-by-port basis. If the switch does not receive updated membership information in a timely fashion, it will stop forwarding multicasts to the port where the end device is located. These pages enable you to configure and display information on IGMP snooping queriers on the network and, separately, on VLANs. The IGMP Snooping Querier feature contains links to the following pages: • IGMP Snooping Querier Configuration on page 144 • IGMP Snooping Querier VLAN Configuration on page 145 • IGMP Snooping Querier VLAN Status on page 146 IGMP Snooping Querier Configuration Use this page to enable or disable the IGMP Snooping Querier feature, specify the IP address of the router to perform the querying, and configure the related parameters. To access this page, click Switching> Multicast > IGMP Snooping Querier > IGMP Snooping > Querier Configuration. 144