Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P Hardware Installation Gui - Page 15
Check the Installation, Installing the Switch on a Wall
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
NETGEAR Managed Switch 8. Tighten the screws with a No. 2 Phillips screwdriver to secure the switch in the wall. Figure 8. Installing the Switch on a Wall Check the Installation Before you apply power, perform the following checks: 1. Inspect the equipment thoroughly. 2. Verify that all cables are installed correctly. 3. Check cable routing to ensure that cables are not damaged and will not create a safety hazard. 4. Be sure that all equipment is mounted properly and securely. Hardware Installation 15
Hardware Installation
15
NETGEAR Managed Switch
8.
Tighten the screws with a No. 2 Phillips screwdriver to secure the switch in the wall.
Figure 8.
Installing the Switch on a Wall
Check the Installation
Before you apply power, perform the following checks:
1.
Inspect the equipment thoroughly.
2.
Verify that all cables are installed correctly.
3.
Check cable routing to ensure that cables are not damaged and will not create a safety
hazard.
4.
Be sure that all equipment is mounted properly and securely.