Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P Hardware Installation Gui - Page 17

Connecting Equipment to the Switch, RJ-45 Ports

Get Netgear GSM7212P PDF manuals and user guides View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

NETGEAR Managed Switch • AGM732F - SFP module with LC connector, compatible with the IEEE 802.3z 1000Base-LX standard. • AFM735 - SFP module with LC connector, compatible with the IEEE 802.3u 100Base-FX standard. 1. insert the module into the switch port. 2. Press firmly to ensure that the module seats into the connector. Figure 9. Insert the SPF Module into the Switch Connecting Equipment to the Switch You can connect devices, a Gigabit Ethernet module, and/or a console to the switch. RJ-45 Ports The switch uses Auto Uplink technology, which enables you to attach devices using either straight-through or crossover cables. Use a Category 5 (Cat5) unshielded twisted-pair (UTP) cable terminated with an RJ-45 connector. Note: Ethernet specifications limit the cable length between the switch and the attached device to 328 feet (100 meters). Hardware Installation 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
Hardware Installation
17
NETGEAR Managed Switch
•
AGM732F - SFP module with LC connector, compatible with the IEEE 802.3z
1000Base-LX standard.
•
AFM735 - SFP module with LC connector, compatible with the IEEE 802.3u 100Base-FX
standard.
1.
insert the module into the switch port.
2.
Press firmly to ensure that the module seats into the connector.
Figure 9.
Insert the SPF Module into the Switch
Connecting Equipment to the Switch
You can connect devices, a Gigabit Ethernet module, and/or a console to the switch.
RJ-45 Ports
The switch uses Auto Uplink technology, which enables you to attach devices using either
straight-through or crossover cables. Use a Category 5 (Cat5) unshielded twisted-pair (UTP)
cable terminated with an RJ-45 connector.
Note:
Ethernet specifications limit the cable length between the switch and
the attached device to 328 feet (100 meters).