Netgear GSM7228PS ProSafe Managed Switch Web Management User Manual - Page 288

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual OSPF Neighbor Table This screen displays the OSPF neighbor table list. When a particular neighbor ID is specified, detailed information about a neighbor is given. The information below will only be displayed if OSPF is enabled. To display the OSPF Neighbor Table page, click Routing OSPF Advanced  OSPF Neighbor Table. Table 34. Field Interface Router ID Neighbor IP Address Area ID Options Router Priority Description Displays the interface for which data is to be displayed or configured. Slot 0 is the base unit. A 32-bit integer in dotted decimal format representing the neighbor interface. The IP address of the neighboring router's interface to the attached network. It is used as the destination IP address when protocol packets are sent as unicasts along this adjacency. Also used in router-LSAs as the Link ID for the attached network if the neighboring router is selected to be designated router. The Neighbor IP address is learned when Hello packets are received from the neighbor. For virtual links, the Neighbor IP address is learned during the routing table build process. The area ID of the OSPF area associated with the interface. An integer value that indicates the optional OSPF capabilities supported by the neighbor. The neighbor's optional OSPF capabilities are also listed in its Hello packets. This enables received Hello Packets to be rejected (i.e., neighbor relationships will not even start to form) if there is a mismatch in certain crucial OSPF capabilities. The OSPF priority for the specified interface. The priority of an interface is a priority integer from 0 to 255. A value of '0' indicates that the router is not eligible to become the designated router on this network. 288 | Chapter 4. Routing