Netgear GSM7228PS ProSafe Managed Switch Web Management User Manual - Page 454

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual To configure HTTPS settings: 1. Use HTTPS Admin Mode to Enable or Disable the Administrative Mode of Secure HTTP. The currently configured value is shown when the web page is displayed. The default value is Disable. You can only download SSL certificates when the HTTPS Admin mode is disabled. 2. Use SSL Version 3 to Enable or Disable Secure Sockets Layer Version 3.0. The currently configured value is shown when the web page is displayed. The default value is Enable. 3. Use TLS Version 1 to Enable or Disable Transport Layer Security Version 1.0. The currently configured value is shown when the web page is displayed. The default value is Enable. 4. Use HTTPS Port to set the HTTPS Port Number. The value must be in the range of 1 to 65535. Port 443 is the default value. The currently configured value is shown when the web page is displayed. 5. Use HTTPS Session Soft Timeout(Minutes) to set the inactivity time-out for HTTPS sessions. The value must be in the range of (1 to 60) minutes. The default value is 5 minutes. The currently configured value is shown when the web page is displayed. 6. Use HTTPS Session Hard Timeout(Hours) to set the hard time-out for HTTPS sessions. This time-out is unaffected by the activity level of the session. The value must be in the range of (1 to 168) hours. The default value is 24 hours. The currently configured value is shown when the web page is displayed. 7. Use Maximum Number of HTTPS Sessions to set the maximum allowable number of HTTPS sessions. The value must be in the range of (0 to 16). The default value is 16. The currently configured value is shown when the web page is displayed. Table 6-87. Field Certificate Present Authentication List Description Displays whether there is a certificate present on the device. Displays authentication list for HTTPS. 454 | Chapter 6. Managing Device Security