Netgear GSM7228PS ProSafe Managed Switch Web Management User Manual - Page 565
SysLog Configuration, Monitoring, Logs > Sys Log Configuration, Admin Status, Local UDP Port
UPC - 606449071696
View all Netgear GSM7228PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 565 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual SysLog Configuration To access the SysLog Configuration page, click Monitoring Logs > Sys Log Configuration. 1. Use Admin Status to enable/disable logging to configured syslog hosts. Setting this to disable stops logging to all syslog hosts. Disable means no messages will be sent to any collector/relay. Enable means messages will be sent to configured collector/relays using the values configured for each collector/relay. Enable/Disable the operation of the syslog function by selecting the corresponding radio button. 2. Use Local UDP Port to specify the port on the local host from which syslog messages are sent. The default port is 514. Specify the local port in the text field. Table 7-115. Field Messages Relayed Messages Ignored Description The count of syslog messages relayed. The count of syslog messages ignored. Chapter 7. Monitoring the System | 565