Netgear GSM7328Sv1 7000 Series Managed Switch Administration Guide for Softwar - Page 253
CLI: Authenticating dot1x Users by a RADIUS Server
View all Netgear GSM7328Sv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.3 CLI: Authenticating dot1x Users by a RADIUS Server (Netgear Switch) #config (Netgear Switch) (Config)#ip routing (Netgear Switch) (Config)#interface 1/0/1 (Netgear Switch) (Interface 1/0/1)#routing (Netgear Switch) (Interface 1/0/1)#ip address 192.168.1.1 255.255.255.0 (Netgear Switch) (Config)#dot1x system-auth-control Enable dot1x on the switch. (Netgear Switch) (Config)#authentication login dot1xList radius Create a username list dot1xList (Netgear Switch) (Config)#dot1x default-login dot1xList Set the dot1xList as the dot1x default login user list. (Netgear Switch) (Config)#radius server host auth 10.100.5.17 To configure a RADIUS authentication server. Netgear Switch) (Config)#radius server key auth 10.100.5.17 Enter secret (16 characters max):123456 Re-enter secret:123456 To configure the shared secret between the RADIUS client and the server. (Netgear Switch) (Config)#radius server msgauth 10.100.5.17 (Netgear Switch) (Config)# radius server primary 10.100.5.17 To set the RADIUS server as a primary server. (Netgear Switch) (Config)#radius accounting mode (Netgear Switch) (Config)#radius server host acct 10.100.5.17 To configure a accounting server. (Netgear Switch) (Config)#radius server key acct 10.100.5.17 Enter secret (16 characters max):123456 Re-enter secret:123456 To configure the shared secret between the accounting server and the client. Security Management v1.0, November 2008 16-15